Jobbing processes led pixel light Manufacturers.The jobbing processes are also designed to cope with very high variety and low volumes. In the project processes of the LED bulb manufacturer, each product has its own allocated resources, in some cases may be more or less exclusively to it. However, in the jobbing processes, each part or product needs to apply the operation’s resources with others. The manufacturing lines in the jobbing processes are making a series of products.
These products may require the same resources and the same type of operation, but they may differ in the levels of usage. Examples of the jobbing processes can be the LED lighting system of a warehouse. Such a project will require different types of LED tube and LED bulb products to achieve the luminous purposes. These products will need to install LED chips, LED driver and LED housing. However, their needs of the same resources will be different in the assembly lines.
Batch processes.In general practice, batch process and jobbing processes can be similar, but the batch processes have less variety compared with the jobbing processes. As the term batch indicates, the output of each process will make more than one piece of the product. In the manufacturing line, each single operation has its own repeatable part.
The individual operation is repeating itself during the batch production. If the size of the batch is small, only two or three pieces, the batch processes will be nearly the same as the jobbing processes. This is normally in the case of a new product. However, if the batch size is large, and the products are frequently manufactured on the production lines, the batch processes can be repetitive. Therefore, the batch processes can support a wider range of volume and variety, compared with other processes. Take an LED bulb manufacturer for example. The manufacturing of the T12 LED tube light and T8 LED tube light can be batch processes, and the size will be large.
Mass processes.The mass processes are designed to deal with products in high volume but low variety, in terms of the design or mechanism of the products. The LED tube light products can be an example. There are many types of tubes available, such as the T12 LED tube light and T8 LED tube light. However, the manufacturing lines are still mass processes because the different features or variants of the tubes do not affect the nature of the manufacturing activities. They are using the same processes, with only some different spare parts installed on the lines. The processes in the LED light production lines are most likely repetitive and predictable. For examples, the tubes are firstly assembled with the chips, then with the drivers, and finally with the housing. Of course, different tubes may use different types of LED chips, LED drivers and housing.
